Venator-Class Star Destroyer
 Venator-Class | |
| Production Information | |
|---|---|
| Class |
Capital Ship |
| Model |
Star Destroyer |
| Manufacturer |
Kuat Drive Yards |
| Technical Specifications | |
| Length |
1137m |
| MGLT |
72 MGLT |
| Hyperdrive Rating |
x1/x8 |
| Shielding |
3300 |
| Hull |
1575 |
| Armament |
|
| Complement |
|
| Crew |
7400 |
| Passengers |
1850 |
| Cargo Capacity |
9.2 kt |
| Usage | |
| Roles |
Escort Carrier |
Contents
Characteristics[edit]
Dimensions[edit]
A stock ship was 1,137 meters long, making it one of the largest capital ships capable of atmospheric operations, landing on planets to load and unload troops and vehicles.
The Venator-class was born from the success of the Acclamator-class assault ship and was designed by Lira Blissex for the purpose of serving as a medium-sized, versatile multi-role warship.
Roles[edit]
Venator cross-section showing (from left to right): Hangar areas, main hypermatter reactor core, hyperdrive and an auxiliary reactor.
While designed primarily for ship-to-ship combat, the Venator had secondary roles ranging from starfighter carrier, to military transport and battleship escorts. The expanded carrier role made the Venator-class popular amongst Jedi starfighter aces.
As a popular multi-role warship of the Republic Navy, the Venator was considered heavily armed and armored enough to lead assaults on Rim worlds like Utapau as well as fast enough to chase down blockade runners. Due to being relatively less self-sufficient than other ships in the fleet, the Venator-class often relied upon supply lines to aid long-range campaigns.
These vessels also sported the red color of diplomatic immunity all Republic ships sported; by the beginning of the Galactic Empire, the hulls were deprived of this symbol of the Republic, giving them a dull Imperial-gray appearance.
Offensive and defensive systems[edit]
The armament of a single Venator-class Star Destroyer consisted of 8 DBY-827 heavy dual turbolaser turrets, 2 medium dual turbolaser cannons, 52 point-defense dual laser cannons or turbolasers,[ and 4 heavy proton torpedo tubes.
The Venator-class's eight heavy dual turbolaser turrets were its main weapons and had two tracking modes. In its precise, long-range tracking mode, the DBY-827 could hit a target vessel at a range of 10 light minutes. During close-range fights, the turrets could rotate in three seconds with their fast-tracking mode.[5] In terms of firepower, these weapons rivaled the main battery on the later Imperial-class Star Destroyers.
The DBY-827 had seven different power settings. This allowed the Venator's pilots and gunners to select a range of destruction, from a small strike to a vaporizing blow. As a true warship, the Venator-class Star Destroyer could divert almost all of its reactor output to its heavy turbolasers when needed. As a result of this, a flotilla of Venators could break through the shields of a Trade Federation battleship with ease
At the suggestion of Anakin Skywalker, a heavy SPHA turbolaser cannon was installed within the ventral hangar bay of some Venator-class ships of the Open Circle Fleet. These weapons were meant to protect the Star Destroyers while they opened their long ventral doors to the army complement bays They would be used to considerable effect during the Battle of Coruscant.
Propulsion systems[edit]
Venators were equipped with powerful engines, a Class 1 hyperdrive with an effective range of 60,000 light-years. Its main reactor could annihilate up to 40,000 tons of hypermatter fuel per second, producing at maximum 3.6 × 1024 watts of power.
The main engine room had several vertical power cylinders littering the room, with walkways on different levels providing access to onboard personnel.
Complement[edit]
Despite possessing powerful weaponry and being on par with the Victory-class, the Venator-class was designed with an additional starfighter carrier role in mind. Its hangar bays were far larger than those on other Star Destroyers like the Victory-class and later models like the Imperator/Imperial-class. The main hangar of a Venator-class vessel.
Prior to the formation of the Galactic Empire, a typical Republic Venator carried a complement of 420 fighters: 192 V-wing or V-19 Torrent starfighters, 192 Eta-2 Actis-class interceptors, and 36 ARC-170 starfighters. The ship also typically maintained a variety of shuttles in its hangars. Since it was capable of entering a planet's atmosphere and landing on its surface, the pre-Imperial Venator-class had a standard complement of 40 LAAT/i gunships and 24 military walkers for planetary operations. The cruiser is also capable of holding one Prefabricated garrison base for long term battles on planets.
In addition to a standard ventral hangar bay, the bow of a Venator could open up to reveal a half kilometer long dorsal flight deck. This flight deck enabled the Venator-class to rapidly launch hundreds of fighters. However, the slow opening and closing of the armored bow doors could leave the ship extremely vulnerable.
Although strong shielding was used to compensate for this weakness, this design aspect would be entirely omitted from later Star Destroyer designs, such as the Imperator/Imperial-class. On ships in the Open Circle Fleet, a SPHA turbolaser cannon was positioned near the ventral hangar opening for the purpose of protecting the ship along the ventral arc. The Venator-class also had hangar-openings on its port and starboard side. These were used to dock with space stations, mooring towers, and larger starships, for the purpose of transferring troops and materials.
Command tower[edit]
Because of its carrier role, the Venator-class featured a novel dual bridge tower design. The port tower was the starfighter command bridge, while the starboard tower served as a standard helm and command bridge. On future designs, this dual bridge design was also employed. The bridge of an Imperial Venator-class Star Destroyer.
The command bridge was designed with dual crew pits where operators would be stationed to control the ship's various functions. Officers would patrol walkways above and have a panoramic view to the outside. This bridge design would become a standard feature on most Imperial warships.[
On top of each tower was a hyperwave communications and scanner module. Its function was similar to the scanner globes on the Imperial-class and other KDY vessels, but it had a flat shape. Flagships in Venator flotillas had red-painted conning towers to separate them from others.
Source[edit]
- Credit to Wookieepedia for the above information
